TEKNOTHERM Thermic Fluid Heating System

Home
TEKNOHEAT
Indierect Air Heaters
LQDTHERM
Hot Water Generators
 
 
 
 
 
 
 
 
 

A SECOND GENERATION SERIES OF LIQUID PHASE THERMIC FLUID SYSTEMS NOW MORE HEAT OUTPUT AT LESSER NERGY COSTS

TEKNOTHERM TVF series are latest generation of systems that have added features over earlier series thus making the series more reliable and guarantees Economy, Reliability and High efficiency by consuming less power and fuel.

Non-pressurized system using thermic fluid as heat transfer.

Thermic fluid has many major advantages when compared with steam or hot water. The first is that this system runs almost pressureless even at high tempreatures. Other benefits include no danger to damage due to freezing when the plant is shut down, no corrosion, accurate tempreature control, high efficiency and low maintanance cost.

HIGH RELIABLITY UNDER EXTREME OPREATING CONDITION

The conservatively dimensioned combustion chamber ensures complete combustion of the fuel, and leads to low heat transfer rates throughout the heating surface, even when working with high feed tempreatures. The coil system is designed and constructed so as to eliminate stresses. Essential for the operating safety is also the flow control which is achieved by a single orifice plate. There is no better method.

LOW FUEL CONSUMPTION AND LOW OPERATING COSTS.
Our modified design programme can supply you with guaranteed efficiency and fuel consumption, simplifying operating cost calculations. The three pass Teknova design produces efficiencies up to and even exceeding 90%, depending upon the fuel used and system configuration. Fuel consumption is always minimized.

HEAVY-DUTY CONSTRUCTION OF ALL COMPONENTS ENSURES A LONG SERVICE LIFE
All Teknotherm Thermic Fluid Heating Systems are the result of continuos development and application of the newest technology. Our aim is for all components to fit and match, down to the last nut and bolt. To ensure this, we take great care in engineering the system and incorporate advances in the design, manufacturing and control area.

In construction, our welders are highly skilled and qualified. For long service life, construction materials that are of proven high quality are selected, Materials subjected to wear, such as refactory are eliminated or their use minimized.

Systems accessories such as pumps, burners and controls are obtained only from well know manufacturers with high quality products. Teknova gurantees the complete system will meet the specified operating conditions and be free from manufacturing defects.


Piping Layout


TECHNICAL SPECIFICATIONS:


MODEL
TV-01
TVF-02
TVF-04
TVF-06
Heat output Kacl/hr
1,00,000
2,00,000
4,00,000
6,00,000
Fuel Consumption LDO kgs/hr.
11.50
22.50
45.00
67.66006
Fo Kgs/hr    
48.00
72.00
Elec.supply
415 volts 6% Hz Ac3 Phase 4 wire
Max. Outlet temp.
300 C
Circulating Pump HP
3
5
7.5
10.00
Blower HP
1
2
3
5
Fuel pump
0.5
0.5
0.5
0.5
Thermic fluid content of the coil of the unit litres
58
75
287
351
Flue gas Outlet mm
200
250
250
300
Approx. Dimensions mm.
Height
2000
2200
2200
2400
Length
1400
1400
1600
1700
Width
1200
1200
1400
1500


Teknova Induastrial Systems continually strives to improve its prod quality, it reserves the right to change or to discontinue specifications and design shown in this broucher without notice and without incurring obligation.